VIBELITE Tap Light, Closet light, Touch Battery-Powered LED Night Light, Magnet Stick-on Anywhere Stair light, Safe Lights for Hallway, Bedroom, Cabinets, etc. (White - Pack of 4)

Two issues with this product;1. The magnet "connection" on the back is not seated, so when you reach to active the light via the center button the whole light assembly is prone to move around or fall off while doing so. If the magnet connection would have had a plastic ring around it perhaps this would not be an issue.2. the glue on the back of the magnet does not hold the weight of the light if trying to install on drywall or painted wood. Mine kept falling off on the first day on install. I'll have to come up with a new way to mount to ceiling of closet to make these work.The brightness of the LED light is satisfactory however I would not recommend purchasing this item.

Excellent night lights. Because of the odd work hours that some of us work, getting dressed in the dark or near dark has become a standard thing, so that the spouse could continue to sleep. In the past, that sometimes means that I picked colors that I though matched, but really did not.What makes this night light special is the color spectrum of the light and the relative brightness of it. It projects a daytime colored light. So what you see in the early morning is going to be the right colors later on in the day.There are multiple ways to pose the light. Physically, the shape of the box makes it very useful. The light easily stands on its own. In addition, there is a prop on the back and you can tilt the light back. It also can lay flat and project the light straight up, projecting light off of the ceiling. There is also a removable magnetic mount on the back of the light.Lastly, the light's on/off button is located in the middle of the lens. I lay light on the lens and in the morning, I can tap the back of the light and get a limited amount of light from around the edges.So far, the battery life has been great.Since this comes in a four pack, if you are in need of a way to easily light some closet or other dark areas of the house, this should be on your purchase list.Best wishes.

I was looking for some taplights for mynew-ish apartment in a house that's over 100 years old. It has the worst lighting but not enough outlets to plug in more lamps. So I was thinking tap lights might be the answer. Then I saw these VIBELIGHT Taplights and liked the fact they had a magnet on the back very much, to carry them as a lantern if needed, and ultimately that sold me on these over the others. (I was originally going to buy a more stylish light.) That and they are very bright! So the pro is yes they definitely are very bright but sadly the magnet set-up on back doesn't hold up the light. They just fall off the wall. Either the magnet you stick to the wall will fall off or the light itself will fall, both happened to me. So that's very disappointing, they're great otherwise so far. However I haven't tested how long they'll last if left on continuously yet but hoping I won't need to test that anytime soon.

Great product! I got the 4 pack. They arrived on time in good condition. The LED lights are VERY bright! It has a very convenient tap-on button in the front.You can hang them on the wall by a hanger located at the back of the light. Or you can remove the magnetic metal disc from the back, remove the protective covering from one side of it, remove the protective covering from the sticky side of it, stick the sticky side wherever you want the light to hang, and then place the light against that disc and it will hang by magnets.Note: The light comes with a magnetic metal disc built into the plastic. It is where the sticky magnetic metal disc was attached, which you remove, as above-mentioned. I would suggest sticking the sticky disc onto something that isn't porous, such as metal or plastic. And somewhere you'd need quick access to it for emergencies. I don't yet know how long the batteries last when constantly on or when occasionally on. I've only had the lights a few weeks.

With 150 to 200 lumens, I am very pleased with the brightness of these lights. I mounted them under my kitchen cabinets and they provide the illumination I need. As other reviewers have reported, they are too heavy for their magnets and will not stay attached. They, started falling off within 3 minutes of mounting them. I ended up attaching them to the cabinets by using gripper tape that is rated to hold up to 10 lbs. They certainly don't weigh 10 lbs but it is what I had on hand. I would recommend them but plan to find your own way of attaching them.I recommend that the manufacturer find a different mounting system.

The cool thing about these lights is that they have this stick on magnet - so you attach the magnet to whatever you are attaching this to, and then you can easily remove the light to change the batteries. I stuck these in the closets in our garage, which we don't use that often but really need the light when we do. The light is clear and bright, and goes off and on with a push of the button. If you're looking for a super easy and not necessarily permanent lighting solution for small spaces, this might be exactly what you need.

These are excellent! :) You must make sure you have several AAA Batteries on hand. It takes 3 per light. I really needed something like this in my kitchen. I have such poor lighting in my kitchen and these help so much. There is a metal base that is adhesive on one side you place that on the location you want your light to be. Then the magnet on the back of the light will stick to that metal base. The adhesive metal bade wouldn't adhere to the wood at the bottom of my cabinets. I intend to adhere it with some wood glue to be a permanent fixture :)

The lights themselves are great. Very bright, and perfect to light up a dark closet.However... The magnets do not hold the light up. The one on my wall, I had to glue with Gorilla glue. The one on the back of the unit is just useless. They just fall off the wall. So.... I will have to use my own magnetic strips to solve the issue.I would think that the manufacturer would actually TEST this feature WITH batteries that add weight, thus causing the issue.