CELL4LESS Compatible Back Glass Cover Back Door w/Pre-Installed Camera Lens - Adhesive-Removal Tool- Camera Lens for Samsung Galaxy S9+ Plus - All Models G965 All Carriers- OEM Replacement (Black)

To start with, the packaging for this is fantastic. You get a very thick and sturdy pressboard case that serves as the shipping carton. Inside the excellent packaging you get the glass back replacement and a very nice flexible metal prying tool. The back fits perfectly and the pre-installed adhesive was great to work with (I had to install my own adhesive on the screen I was replacing (not from Cell4Less)). The only downsides were that the writing on the back is slightly darker than OEM so it doesn't show up as well. This doesn't matter to me because my phone is almost always in a case. Also, I found that the adhesive around the outside edge started to come up a little bit as I pulled the plastic back. Not enough to take a star away as I was able to get it to work, however, it did make prep slightly more difficult. Overall, this product is excellent and I will be using Cell4Less for any other replacement parts I might need.

This is a perfect fit and color match for my Galaxy S9+.The video makes it look easy. I had some challenges with the old back glass which was already broken. It shattered several times while removing the old back. Once I got the old back off, the new one went on with ease.Very happy with the product as well as the video on how to replace.

I started with buying an ifixit replacement back plate. It came blank (no logos, no markings on the back, obvious replacement plate), the adhesive came off with the protective sticker so I had to realign it, and the plate cracked while lightly pushing it in place.Got this one was a follow up. The markings were all there, the adhesive not only didn't fall off but came with more and in the proper places, and most importantly didn't crack by looking at it wrong.Great replacement, if you're considering this one or an ifixit replacement, buy this one 100%.

Easy to install, and worked great. Took one star off because the color is a little bit different than original back.

This was a perfect fit for my Galaxy S9+. I originally bought a slightly cheaper back glass, and it was mostly OK, but it was about 0.5mm oversized. That doesn't sound like much, but it was perceptible when holding the phone. This item cost about 30% more, but the fit was perfect.I am just now looking at it, and I noticed a micro-fracture has developed. I wouldn't call it a crack, but more of a nano-line. It's so small that it's smooth to the touch when you run your finger over it. It might be my fault from being rough with it. It's such a small fracture that my fingerprint residue almost obscures it -- I might not have noticed it if I hadn't wiped it down. That being said, I'd much rather have this than the other unit I had, which although it was slightly cheaper, was only a "pretty-darn-close" fit. This item is/was a perfect fit.I installed it myself with no problems. I had an appropriate spudging tool to separate the existing back glass from the chasis, some 90%+ isopropyl alcohol in a mister bottle, and a lint-free cloth. I think using the isopropyl alcohol and a lint-free cloth to remove the previous adhesive, and to clean/prep where the new back glass adhesive will stick, is a worthwhile investment of your time.Order of operations:* Use a spudger to remove existing back glass. Note that this process will likely cause damage to the back glass -- but presumably you're replacing it because it's already damaged.* Spray 90%+ isopropyl alcohol onto a lint-free cloth and gently remove all adhesive residue that the original back glass left behind.* Slowly and patiently place new back glass onto phone frame. Get this right on your first try. If you miss by a fraction of a millimeter, and then try to remove it and try again, the adhesive won't come off cleanly, which will cause uneven layers of adhesive, which will make the fit uneven and jeopardize waterproofing.

This product looked exactly like the original. I bought this for a battery replacement I was doing on a Samsung Galaxy S9 Plus. The original glass back shattered during removal. Samsung does not skimp on adhesion. So, I bought this back as a replacement. It looks factory and was super easy to attach. During battery and back replacement I will say the only difficult parts was removing the back and reattaching the finger print scanner. I had to use a small screw driver and luck to push the connection back in place. Again, as for the back glass it was super easy to put back on. Great product for the price.

This backing is almost identical to the original although it seems to be just a hair thicker than the original. Otherwise you can't tell at all. Fair warning, if you're removing a cracked back that is pretty severely damaged, the original backing can scratch the metal framing of the phone during removal. Edit: this replacement ended up cracking on me as I suspect it was too large. Maybe defective, getting a replacement and will wait to see what happens with it after installation.

Doesn't seem to be made of glass, Probably plastic like others have said.But the install went fine and I reused the stock camera cover, Fitment of the camera cover & fingerprint reader is good enough and I dont see why there'd be any complaints on this for its price.Durability seems good, I don't see how anyone cracked theirs so easily or after installing, I twisted my replacement side to side before install and it flexed without cracking or anything so I think it'll be fine.Looks great, Worked well and my phone looks brand new now after some extra work I had to do on it.

I accidentally broke my s9 plus back glass cover and its not pretty to use..i purchase the back glass cover and check on you tube how to install it, its easy and within 5 mins i excellently replace my back glass cover.

remplacer coque arriere abimé de mon s9 plus..ce fut parfait..

Easy to install and fit perfectly on my s9+

Perfect replacement kit. Easy to install.

The glass I got looks pretty nice i'll be honest. But this is far from OEM glass. For 2 weeks it was great but then got a pressure crack. Would be fine if you threw a Dbrand skin over it but if you live where its cold, its not made to last.